PALM Laser Microscope Microlaser Microbeam Capture Zeiss Axiovert 200M P.A.L.M

This Zeiss Axiovert 200M Inverted Fluorescence Microscope System was removed from a university lab where it was surplus to requirements.

We were assured the system was in good working order prior to removal from the lab.

All the items are in good used cosmetic condition and everything powers up as it should. The lamp and the automated objective selection work fine on the microscope. We believe it requires PC software to control the stage. We were unable to test it any further as we cannot adjust the stage for testing.

The lab has the original PC but is unable to supply it to us at this time. There is a lot of software with the system so it is very possible that the correct software is included, but it is likely we are missing the appropriate PCI card.

The system consists of:

1 x Zeiss Axiovert 200M Microscope.

With the following extras:

1 x Zeiss AxioCam MRm.

1 x Hitachi HV-D30.

1 x Zeiss CapMover.

1 x HAL 100 Lamp.

1 x Automated Stage with various slide adapters.

It has the following 6 x Objectives fitted:

1 x Zeiss

LD Plan-NEOFLUAR

63x/0,75 korr

∞/0-1,5

1 x ZEISS

EC Plan-NEOFLUAR

100x/1,3 Oil

∞/0,17

1 x ZEISS

FLUAR

5x/0,25

∞/0,17

1 x ZEISS

FLUAR

10x/0,50

∞/0,17

1 x ZEISS

LD Plan-NEOFLUAR

20x/0,4 Korr

∞/0-1,5

1 x ZEISS

LD Plan-NEOFLUAR

40x/0,6 Korr

∞/0-1,5.

1 x Zeiss Palm MicroBeam

Base unit.

1 x EXFO X-Cite 120 Fluorescence Illumination System.

1 x EXFO Collimating Adapter 810-00022.

With EXFO 805-00038.

1 x CryLaS FTSS 355-50.

1 x Zeiss SYS63TE/PA7 Control Unit.

1 x Marquardt Foot Controller.

1 x P.A.L.M. Joystick Controller.

Various software discs and manuals.

1 x Box of PALM Slide Holders.

Contains 4 x Different Slide Holders.

1 x Zeiss Box Containing Various items including a box for the AxioCam which contains software discs, various cables, and parts.