Nikon Metrology Optical CMM 3D Laser Scanner, ModelMaker, K600, K-Scan MMDx100

Nikon Metrology (Metris) 3D Laser Scanner, Handheld ModelMaker, CMM Scanner, K600, K-Scan, MMD, WMD

Set includes:

K-Robot Probe SN: KRP-1311

K-Scan Probe SN: KSP-1344

Metris ModelMaker MMDX100 SN: 1947

Metris Qualification Plate MAES-010-195 SN: 10196584

Calibration Date: 13-01-2014 (0.0183mm / 200.0972mm)

Metris Space Probe SN: SPP-03398 with 2 spare tips

12 Sets of Metris Strober Units with LEDs

around 54 Leds in Total / 18pcs of K2 Leds + 36pcs of K Leds

Metris K-Reference Bar

SN: AKref-04220

Strober Joystick with cable

Metris Controller Rev 4.2 SN: K6R-12379

Metris K600 Optotrak Camera System STDC-010-020 SN: K6C-12355

Documentation:

Sensor Verification Report for MMDX100 (27/01/2014)

Camera verification Report for K600 (19/04/2011)

Calibration Files on the CDs

Software instalation Files with licence dongles:

1) Focus Nikon Metrology Software SONME14-02511

2) Focus CMM Manager

3) Focus Nikon HandHeld

4) K-Series Software (Geoloc 1.5, K-CMM 6.4, K-Interface 3.1.63)

There is on more Licence Dongle but without installation files - this licence is for RoCal

RoCal Nikon Metrology software based on their 6D measurement sensors.

ROCAL –which stands for RObot CALibration

Software for measurements of robot for Kinematic Errors.

This can track multiple 6D frames simultaneously for a full understanding of the robot behavior.

Measurements can be dynamic as well as static, to give a full understanding of the machine.

Instrument is in fully working order. Currently in use.

There is a link to ftp server

ftp.innovmetric.com/pub/

where you can download some drivers, firmware and software.

This is really an advanced piece of equipment- not just plug and play.

Engineering knowledge is required during installation and use.